Welcome to ADTECH (SHENZHEN) TECHNOLOGY CO., LTD.
Products Product Center
Products Product Center
型号: Q2BYG403MD
时间: 2017 - 10 - 09
Q2BYG403MD二相混合式步进驱动器是基于交流伺服原理控制的两相全数字混合式步进电机驱动器。它是将先进的DSP控制芯片、独特的控制电路结合一起所构成的新一代全数字步进电机驱动器。这种设计使其集成度大幅度提高,体积和重量大为减小。采用先进的电流控制算法使其具有优越的性能表现,低振动、低噪音、低发热和高速大力矩输出。The Q2BYG403MD two-phase hybrid stepper drive is a two-phase all-digital driver for hybrid stepper motor based on AC servo principle control. It is a new generation of all-digital stepper motor driver that combines advanced DSP control chip and unique control circuit. This design greatly increases the degree of integration and greatly redu...
时间: 2017 - 10 - 09
ADTECH QXM series Servo Driver with High Performance that the excellent drive performance has reached the international leading level incorporats the world's leading edge servo control technology. Excellent performance, fast response, precise positioning, vibration suppression, automatic parameter design, programmable, convenient operation, saturation limit speed increase, electronic cam, gantry synchronization, capture comparison, etc. They are widely used in dispensing, machine tools,...
型号: QXE
时间: 2017 - 10 - 09
ADTECH QXM series Servo Driver with High Performance that the excellent drive performance has reached the international leading level incorporats the world's leading edge servo control technology. Excellent performance, fast response, precise positioning, vibration suppression, automatic parameter design, programmable, convenient operation, saturation limit speed increase, electronic cam, gantry synchronization, capture comparison, etc. They are widely used in dispensing, machine t...
型号: QS2
时间: 2017 - 10 - 09
The QS2 DC servo drivers were developed by ADTECH for low-voltage and low-cost applications. Based on years of experience in the general servo field, they have built-in multiple algorithms, flexible parameter settings, compact size, widely used in 200W ~ 400W low power applications with low-voltage servo motor.
型号: QS8
时间: 2017 - 10 - 09
QS8系列标准型交流伺服驱动器是众为兴研发的第四代伺服驱动产品,优化的软件算法,成熟稳健的硬件结构,涵盖200W到4.3KW功率范围。QS8 series standard AC servo drive is the fourth generation of servo drive developed by ADTECH, which has optimized software algorithms and mature and robust hardware structure covering the power range from 200W to 4.3KW.
型号: QS7
时间: 2017 - 10 - 09
QS7 series standard AC servo driver is the third generation of servo driver developed by ADTECH, which has optimized software algorithms and mature and robust hardware structure covering 100W to 5.5KW power range.
型号: QH2
时间: 2017 - 10 - 09
The temperature rise of QH hybrid servo driver is reduced by one-third comparing to the stepping driver, the acceleration and deceleration response is faster, the 1000-line encoder does not lose step, and has vibration suppression function.The temperature rise of QH hybrid servo driver that has vibration suppression function is reduced by one-third comparing to the stepping driver, which has faster acceleration and deceleration response and the 1000-line encoder doe...
型号: EMCS
时间: 2015 - 10 - 13
EM系列总线伺服驱动器支持多种主流实时工业以太网,支持多种编码器接口,产品性能卓越,软件调试界面丰富,全金属机箱设计,EMC性能优异,充分考虑散热结构,保证良好的散热效应。
型号:
时间: 2015 - 08 - 20
AMC1600E is the latest open-ended Motion Controlling Platform launched by ADTECH.  It supports IEC6113-3 programming, 16-axis bus and 6-axis pulse hybrid control, HMI, IO, DA, AD that can be flexibly configured according to customer's actual situation, and powerful motion control processing function with Pre-processing planning functions of motion track, spline interpolation, electronic cam and other motion functions.
Total64Page4/8HomePrev12345678NextEnd
ADTECH (SHENZHEN) TECHNOLOGY CO., LTD.
Address:No.93-1 Building ,Tangxin Road, Ren'tian Community, Fuhai Street, 
Bao'an District, Shenzhen,China 518103
Tel : 86 755 2609 9116 
Fax:0755-26722718-314
E-mail:tech@adtechcn.com

National sales hotline

400-168-2718

Public for the public letter

Copyright ©2005 - 2013 深圳众为兴技术股份有限公司
犀牛云提供企业云服务
X
5

电话号码管理

1

QQ设置

3

SKYPE 设置

4

阿里旺旺设置

等待加载动态数据...

等待加载动态数据...

6

二维码管理

等待加载动态数据...

等待加载动态数据...

展开