Welcome to ADTECH (SHENZHEN) TECHNOLOGY CO., LTD.
Solution Solution
Solution Solutions
Top news / 热点新闻
2020 - 05 - 07
点击次数: 136
On October 18th, the 2019 China Skills Competition - the final of the 3rd National Industrial Robot Technology Application Skills Competition kicked off in Jinan City, Shandong Province,there are many...
2020 - 05 - 07
点击次数: 60
On June 13th, the results of the annual selection of the China Robotics Industry in the Weike Cup·OFweek 2019 were announced in Shenzhen. With strong comprehensive strength, leading sales perform...
2020 - 05 - 07
点击次数: 75
On December 21, 2019, the 'Shenzhen Industrial Automation Industry Association' (hereinafter referred to as the Association) co-sponsored by eight companies such as  ADTECH Shenzhen ...
2020 - 05 - 07
点击次数: 50
Recently, the selection of the 'Shenzhen Equipment Industry-Leading Enterprise in the Subdivided Sector' sponsored by Shenzhen Electronic Equipment Industry Association and Shenzhen Intelligen...
2020 - 05 - 07
点击次数: 82
Recently, ADTECH has received the “Notice on Accreditation of Guangdong Engineering Technology Research Center in 2019” issued by the Guangdong Provincial Department of Science and Technolog...
2020 - 05 - 07
点击次数: 57
Since the outbreak of the epidemic, masks have become a hard currency. As companies resume work and production, their use has increased. The domestic medical surgical masks and N95 masks have a daily ...
Contact
13570626158
Hotline:400-168-2718
E-mail:export@adtechen.com
China · Shenzhen
Shenzhen Nanshan District Yiyuan Road Majia Long Tianxia IC Industrial Park, 5th Floor

The application of ADTECH SCARA robot in the automatic soldering industry

Release time 2017-10-11
Views: 2831
share:

Key words:

ADTECH, SCARA robot, four-axis horizontal multi-joint robot, four-axis robot, automatic soldering

Overview:

In keeping with the development of the times, ADTECH adopts the mode of “SCARA robot + automatic welding torch”to replace the traditional automatic soldering machine and manual operation, which has higher production efficiency than manual and the solder quality is quite stable. Each solder joint of the automatic soldering robot can be controlled within the manufacturer's specifications.

Content:

Abstract: The introduction of the four-axis horizontal multi-shutdown robot for the solder industry.

Keywords: ADTECH, SCARA robot, four-axis horizontal multi-joint robot, four-axis robot, automatic soldering


Application background

After the back end of SMT process, substrate is heated and soldered by the SMT patch and the reflow oven, but some parts still need to be soldered after the artificial plug. We take the connector as an example. As the product requirements are getting higher and higher, the spacing of the connectors is getting thinner and finer. The original artificial solder has a poor environment and unstable working conditions, resulting in higher and lower defect rates. The finest degree that the naked eye can distinguish is only 0.1mm, and more and more small parts are not suitable for the repeated processing after repairing. Most of the traditional solutions use the mode of “cartesian robot + solder head” to automatically solder. In the use of actual industrial field, this project has problems such as slow processing speed, large floor space, low flexibility, low precision, etc. When the soldering process demands are increasingly developing to high speed, precision and flexibility, traditional automatic soldering machines have failed to meet market requirements.


Application introduction

In keeping with the development of the times, ADTECH adopts the mode of “SCARA robot + automatic welding torch”to replace the traditional automatic soldering machine and manual operation, which has higher production efficiency than manual and the solder quality is quite stable. Each solder joint of the automatic soldering robot can be controlled within the manufacturer's specifications. The adopted SCARA robots is independently developed by ADTECH. It has characteristics of stable performance, high speed and high precision, and has been verified at many domestic customer sites.


Prev:NoneNext:None
Recommended Solutions / MORE +
Views: 2831
Release time 2017 - 10 - 11
Key words:ADTECH, SCARA robot, four-axis horizontal multi-joint robot, four-axis robot, automatic solderingOverview:In keeping with the development of the times, ADTECH adopts the mode of “SCARA robot + automatic welding torch”to replace the traditional automatic soldering machine and manual operation, which has higher production efficiency than manual and the solder quality is quite stable. Each solder joint of the automatic soldering robot can be controlled within the manufacturer's specifications.Content:Abstract: The introduction of the four-axis horizontal multi-shutdown robot for the solder industry.Keywords: ADTECH, SCARA robot, four-axis horizontal multi-joint robot, four-axis robot, automatic solderingApplication backgroundAfter the back end of SMT process, substrate is h...
Views: 702
Release time 2014 - 07 - 01
Key words:AOI, motion control, machine vision, automatic optical inspection, motion control cardOverview:AOI is an automatic control system that combines motion control and machine vision. Machine vision completes the photographing and contrast detection of the workpiece. The motion control module controls the motion of the workpiece or controls the camera movement to assist detection. In this industry, the motion control method is point control and has two requirements of high speed and smoothness.content:Automated Optical Inspection (AOI) is an effective method for industrial automation. This technology combines motion control with machine vision and is widely used in LCD/TFT and PCB industries. When automatically detecting, the machine automatically scans the workpiece through the camer...
Views: 5440
Release time 2017 - 10 - 11
In the present CNC machine tools industry, robotic tool change has become mainstream. Compared with other tool change methods, the robot tool changer has the characteristics of faster speed, and higher accuracy, and smaller motion range of various mechanical components.However, in the robot tool change, there are also the following pain points:01.The action of tool magazine robotic arm is inaccurateEach start and stop of the tool change action made by the robotic arm sends a brake signal to the controller through the tool magazine itself. After receiving the brake signal, the controller immediately sends a broken robot to rotate the output. This part requires the controller to have a higher signal processing speed. If it is not reached, the robot will not be allowed to move.02.The memory e...
ADTECH (SHENZHEN) TECHNOLOGY CO., LTD.
Address:No.93-1 Building ,Tangxin Road, Ren'tian Community, Fuhai Street, 
Bao'an District, Shenzhen,China 518103
Tel : 86 755 2609 9116 
Fax:0755-26722718-314
E-mail:tech@adtechcn.com

National sales hotline

400-168-2718

Public for the public letter

Copyright ©2005 - 2013 深圳众为兴技术股份有限公司
犀牛云提供企业云服务
X
5

电话号码管理

1

QQ设置

3

SKYPE 设置

4

阿里旺旺设置

等待加载动态数据...

等待加载动态数据...

6

二维码管理

等待加载动态数据...

等待加载动态数据...

展开