Welcome to ADTECH (SHENZHEN) TECHNOLOGY CO., LTD.
News News
News News
Top news / 热点新闻
2020 - 05 - 07
点击次数: 6
On October 18th, the 2019 China Skills Competition - the final of the 3rd National Industrial Robot Technology Application Skills Competition kicked off in Jinan City, Shandong Province,there are many...
2020 - 05 - 07
点击次数: 4
On June 13th, the results of the annual selection of the China Robotics Industry in the Weike Cup·OFweek 2019 were announced in Shenzhen. With strong comprehensive strength, leading sales perform...
2020 - 05 - 07
点击次数: 6
On December 21, 2019, the 'Shenzhen Industrial Automation Industry Association' (hereinafter referred to as the Association) co-sponsored by eight companies such as  ADTECH Shenzhen Technolo...
2020 - 05 - 07
点击次数: 2
Recently, the selection of the 'Shenzhen Equipment Industry-Leading Enterprise in the Subdivided Sector' sponsored by Shenzhen Electronic Equipment Industry Association and Shenzhen Intelligent Equipm...
2020 - 05 - 07
点击次数: 9
Recently, ADTECH has received the “Notice on Accreditation of Guangdong Engineering Technology Research Center in 2019” issued by the Guangdong Provincial Department of Science and Technolog...
2020 - 05 - 07
点击次数: 5
Since the outbreak of the epidemic, masks have become a hard currency. As companies resume work and production, their use has increased. The domestic medical surgical masks and N95 masks have a daily ...
Contact
13570626158
Hotline:400-168-2718
E-mail:export@adtechen.com
China · Shenzhen
Shenzhen Nanshan District Yiyuan Road Majia Long Tianxia IC Industrial Park, 5th Floor

The comparison between truss manipulators and articulated industrial robots on applications of loadi

Release time 2018-10-18
Views: 95
share:

The comparison between truss manipulators and articulated industrial robots on applications of loading machine tools


Many machining companies know that there are many solutions in the application of machine tool loading and unloading. Among them, the application of articulated robots and truss type loading and unloading robots can be realized. So what are the differences between the two in the application? How to judge? How to make a simple comparative analysis of truss type robots and joint industrial robots from four aspects: application layout, man-machine management, efficiency, and cost?

 

1. Layout aspect
The truss manipulator is generally erected above the machine tool with a single track and a small footprint. Joint robots generally adopt a pair of 2 or 1 pair 3 (“品” shape layout). To ensure safety, the entire processing unit should be protected in an all-round way, while the upside down walking robot is too expensive, and the system has low complexity and low input. For practical applications, we will not focus on the discussion.

 

2. Human-machine collaboration

Since the workers of truss manipulator production line can monitor the processing process, sampling is convenient and the problems can be eliminated quickly with a good human-machine cooperation.

Due to the unpredictability of the motion track of the joint robot, the production unit is completely enclosed and the workers can't participate in the actual production process. In the production process, a series of monitoring and management are carried out on the silos, production equipment and robots in the production process. The system is huge, complicated and with high cost.

 

3. Efficiency (operating rate)

Operating rate is the standard of measuring the stable production of equipment. The introduction of robots automatically loading and unloading materials, in the actual production process, the stability of the blank quality, tool quality and life management needs to have higher requirements. The whole production process of the joint robot loading and unloading is unmanned and the management of the tool . The management of the tool is specific to  the size that a knife make and the needs of cutter compensation size and compensated cutter size. If there are several knives involved in this size, it has greater challenges for production management and higher requirements on system integration. Because of the good human-machine cooperation, sampling and cutter compensating can be achieved by low threshold.

 

4. Cost aspects

Unit price, management and maintenance costs of the truss manipulator is generally lower than the joint industrial robot. Especially the multi-connected truss manipulator is much cheaper than the articulated manipulator, and the maintenance and management costs are also low.

Through the simple comparison above, it can be seen that although the vertical multi-joint robot has been widely applied to casting, handling, welding, and system integration for its three-dimensional space posture, high-accuracy positioning, and the convenient operation, it is defeated by the 'stupid' truss manipulator with simple structure and single trajectory in the 'simple' handling industry of machine tool loading and unloading. it is most important to choose the most suitable one when transforming the automated production line of machine tools.

The simplicity of the truss manipulator allows people to participate in the monitoring of the production process, which is a gradual replacement for unmanned operations. This is actually more suitable for the existing production management methods of local enterprises.


推荐产品 / Recommended products MORE +
2017 - 10 - 09
86H Hybrid servo motorCompatible to ADTECH Hybrid Servo Driver
2015 - 08 - 20
AMC1600E is the latest open-ended Motion Controlling Platform launched by ADTECH.  It supports IEC6113-3 programming, 16-axis bus and 6-axis pulse hybrid control, HMI, IO, DA, AD that can be...
2017 - 10 - 09
ADTECH QXM series Servo Driver with High Performance that the excellent drive performance has reached the international leading level incorporats the world's leading edge servo control technology...
2017 - 10 - 09
ADTECH QXM series Servo Driver with High Performance that the excellent drive performance has reached the international leading level incorporats the world's leading edge servo control techn...
ADTECH (SHENZHEN) TECHNOLOGY CO., LTD.
Address:Shenzhen Nanshan District Yiyuan Road Majia Long Tianxia IC Industrial Park, 5th Floor
Tel : 86 755 2609 9116 
Fax:0755-26722718-314
E-mail:export@adtechen.com

National sales hotline

400-168-2718

Public for the public letter

Copyright ©2005 - 2013 深圳众为兴技术股份有限公司
犀牛云提供企业云服务
X
5

电话号码管理

1

QQ设置

3

SKYPE 设置

4

阿里旺旺设置

等待加载动态数据...

等待加载动态数据...

6

二维码管理

等待加载动态数据...

等待加载动态数据...

展开